Flexible split-system heat-pump design

Daikin Altherma 3R Split

A high-efficiency air-to-water heat pump for heating, optional cooling and domestic hot water, with separate indoor and outdoor equipment for flexible installation layouts.

Final model, capacity, cylinder and system design are subject to a property survey and room-by-room heat-loss calculation.

Why consider the Daikin Altherma 3R Split?

Heating, cooling and hot water

Selected configurations provide space heating, optional cooling and domestic hot water.

Up to A+++

Suitable configurations achieve an energy label up to A+++ for space heating.

Cold-weather operation

Daikin specifies operation down to -25°C on applicable Altherma 3R models.

Hot water up to 60°C

Applicable configurations can provide domestic hot water temperatures up to 60°C.

Onecta smart control

Compatible configurations support Daikin Onecta app control and scheduling.

Flexible indoor options

Choose a wall-mounted hydrobox or integrated cylinder arrangement to suit the design.

Specifications vary by model, output and system configuration. JMG Renewables will identify the exact model in your written quotation. View manufacturer information.

Is this system suitable for your home?

Homes where the pipe route or equipment position benefits from a split-system design.

Suitability depends on calculated heat loss, required flow temperature, radiator or underfloor-heating performance, electrical supply, hot-water demand, pipe routes and outdoor-unit positioning.

Ask JMG to design your system

Your survey should confirm

  • Required heating output
  • Design flow temperature
  • Radiator or emitter upgrades
  • Hot-water cylinder capacity
  • Outdoor-unit location and acoustics
  • Electrical and pipework requirements

Daikin Altherma 3R Split gallery

Product video

What your quotation can include

  • Correctly sized heat pump
  • Suitable hot-water cylinder
  • Room-by-room heat-loss calculation
  • System design and controls
  • Outdoor-unit mounting arrangement
  • Required plumbing and electrical work
  • Emitter upgrades where needed
  • Installation and commissioning
  • MCS documentation and grant application
  • Handover, warranty registration and aftercare

Equipment is selected for the property rather than promised as a fixed standard package.

Boiler Upgrade Scheme support

£7,500

Standard heat-pump grant

Eligible homeowners may receive £7,500 towards an eligible air-to-water heat-pump installation.

Up to £9,000

Eligible off-grid oil or LPG homes

A higher grant may be available for qualifying off-gas-grid properties currently heated by oil or LPG.

Eligibility and voucher approval are subject to the current scheme rules. JMG applies for the voucher on the customer’s behalf as the installer.

Check grant information

Compare other heat-pump systems

System Type May suit
Daikin Altherma 3R Split Split air-to-water Homes where the pipe route or equipment position benefits from a split-system design.
Daikin Altherma 3 small monobloc Compact monobloc Suitable smaller homes where the calculated heat load matches the available low-capacity range.
Daikin Altherma 3 large monobloc Higher-output monobloc Larger or higher-loss properties requiring more output after a full heat-loss calculation.
Vaillant aroTHERM plus Premium monobloc Retrofit and new-build projects needing a premium system with a wide capacity range.
Panasonic Aquarea Model-dependent range A wide variety of new-build, retrofit and colder-climate requirements.
Grant Aerona 290 R290 monobloc Homes requiring a broad output range, high seasonal efficiency and Quiet Mark accredited design

Return to the full heat-pump comparison

From survey to aftercare

1

Survey

Property, heating system, hot water and equipment locations assessed.

2

Design

Heat loss, capacity, cylinder and emitter requirements calculated.

3

Quote and grant

Written specification prepared and eligible grant process supported.

4

Installation

System installed, commissioned, handed over and supported.

Daikin Altherma 3R Split FAQs

What capacity do I need?

The correct capacity must be calculated from a room-by-room heat-loss assessment. Floor area alone is not enough.

What cylinder size will be included?

The cylinder is selected for household hot-water demand, available space and the system design rather than supplied as one fixed size.

Will my radiators need replacing?

Existing emitters are checked against the required system temperatures. Only the upgrades required by the design should be included.

Is the installation free with the grant?

No. The grant contributes towards an eligible installation; the remaining cost depends on the property-specific quotation.

Can JMG service the system?

Yes. View heat-pump servicing and maintenance options.

Request a Daikin Altherma 3R Split survey

Tell us about your property and current heating system. JMG Renewables will contact you to discuss the next step.

What system do you have now?
How many bathrooms do you have?
Name
Address

Stripe and Klarna available at checkout. Where offered, choose Klarna securely through our Stripe payment page. Availability is subject to Klarna’s approval and terms.

Official Daikin interactive experience

Explore Daikin’s Virtual Showroom

Step inside Daikin’s Virtual Experience Center to explore heating, cooling, ventilation and hot-water solutions. The experience opens on Daikin’s official website.

Open the Daikin Virtual Showroom