Flexible Panasonic air-to-water range

Panasonic Aquarea

A broad family of air-to-water heat pumps covering efficient new-build systems, retrofit applications and cold-climate designs, with final selection based on the property survey.

Final model, capacity, cylinder and system design are subject to a property survey and room-by-room heat-loss calculation.

Why consider the Panasonic Aquarea?

Broad Aquarea family

High Performance, T-CAP and other Aquarea ranges address different property and climate requirements.

Up to A+++

Applicable low-temperature systems achieve an energy label up to A+++.

Cold-climate options

Selected T-CAP models are designed for operation down to -28°C and sustained output in low temperatures.

High-temperature options

Selected newer Aquarea models can provide water outlet temperatures up to 75°C.

Cylinder configurations

Available designs include separate-cylinder and integrated all-in-one arrangements.

Comfort Cloud options

Compatible configurations support Panasonic connected controls and service monitoring.

Specifications vary by model, output and system configuration. JMG Renewables will identify the exact model in your written quotation. View manufacturer information.

Is this system suitable for your home?

A wide variety of new-build, retrofit and colder-climate requirements.

Suitability depends on calculated heat loss, required flow temperature, radiator or underfloor-heating performance, electrical supply, hot-water demand, pipe routes and outdoor-unit positioning.

Ask JMG to design your system

Your survey should confirm

  • Required heating output
  • Design flow temperature
  • Radiator or emitter upgrades
  • Hot-water cylinder capacity
  • Outdoor-unit location and acoustics
  • Electrical and pipework requirements

Panasonic Aquarea gallery

Product video

What your quotation can include

  • Correctly sized heat pump
  • Suitable hot-water cylinder
  • Room-by-room heat-loss calculation
  • System design and controls
  • Outdoor-unit mounting arrangement
  • Required plumbing and electrical work
  • Emitter upgrades where needed
  • Installation and commissioning
  • MCS documentation and grant application
  • Handover, warranty registration and aftercare

Equipment is selected for the property rather than promised as a fixed standard package.

Boiler Upgrade Scheme support

£7,500

Standard heat-pump grant

Eligible homeowners may receive £7,500 towards an eligible air-to-water heat-pump installation.

Up to £9,000

Eligible off-grid oil or LPG homes

A higher grant may be available for qualifying off-gas-grid properties currently heated by oil or LPG.

Eligibility and voucher approval are subject to the current scheme rules. JMG applies for the voucher on the customer’s behalf as the installer.

Check grant information

Compare other heat-pump systems

System Type May suit
Daikin Altherma 3R Split Split air-to-water Homes where the pipe route or equipment position benefits from a split-system design.
Daikin Altherma 3 small monobloc Compact monobloc Suitable smaller homes where the calculated heat load matches the available low-capacity range.
Daikin Altherma 3 large monobloc Higher-output monobloc Larger or higher-loss properties requiring more output after a full heat-loss calculation.
Vaillant aroTHERM plus Premium monobloc Retrofit and new-build projects needing a premium system with a wide capacity range.
Panasonic Aquarea Model-dependent range A wide variety of new-build, retrofit and colder-climate requirements.
Grant Aerona 290 R290 monobloc Homes requiring a broad output range, high seasonal efficiency and Quiet Mark accredited design

Return to the full heat-pump comparison

From survey to aftercare

1

Survey

Property, heating system, hot water and equipment locations assessed.

2

Design

Heat loss, capacity, cylinder and emitter requirements calculated.

3

Quote and grant

Written specification prepared and eligible grant process supported.

4

Installation

System installed, commissioned, handed over and supported.

Panasonic Aquarea FAQs

What capacity do I need?

The correct capacity must be calculated from a room-by-room heat-loss assessment. Floor area alone is not enough.

What cylinder size will be included?

The cylinder is selected for household hot-water demand, available space and the system design rather than supplied as one fixed size.

Will my radiators need replacing?

Existing emitters are checked against the required system temperatures. Only the upgrades required by the design should be included.

Is the installation free with the grant?

No. The grant contributes towards an eligible installation; the remaining cost depends on the property-specific quotation.

Can JMG service the system?

Yes. View heat-pump servicing and maintenance options.

Request a Panasonic Aquarea survey

Tell us about your property and current heating system. JMG Renewables will contact you to discuss the next step.

What system do you have now?
How many bathrooms do you have?
Name
Address

Stripe and Klarna available at checkout. Where offered, choose Klarna securely through our Stripe payment page. Availability is subject to Klarna’s approval and terms.