Flexible split-system heat-pump design

Grant Aerona 290

Grant’s inverter-driven air-to-water heat-pump range combines natural R290 refrigerant, high seasonal efficiency, multiple outputs and Quiet Mark accredited acoustic design.

Final model, capacity, cylinder and system design are subject to a property survey and room-by-room heat-loss calculation.

Why consider the Grant Aerona 290?

4 to 15.5kW range

Single-phase outputs include 4, 6.5, 9, 12 and 15.5kW, with the final model selected from the property heat-loss design.

A+++ at 35°C

Every Aerona 290 model is rated A+++ at 35°C water flow and A++ at 55°C.

Natural R290 refrigerant

The range uses natural R290 refrigerant with dedicated safety features and installer protection-zone requirements.

High seasonal performance

Grant publishes SCOP figures up to 5.08 at 35°C water flow, depending on model.

Quiet Mark accredited

Sound-reducing casing and compressor features help the range achieve Quiet Mark accreditation.

Aerona Smart Controller

Compatible smart controls support weather and load compensation, remote management and installer diagnostics.

Specifications vary by model, output and system configuration. JMG Renewables will identify the exact model in your written quotation. View manufacturer information.

Is this system suitable for your home?

Homes requiring a modern monobloc heat pump across a broad output range, subject to heat-loss design and R290 installation requirements.

Suitability depends on calculated heat loss, required flow temperature, radiator or underfloor-heating performance, electrical supply, hot-water demand, pipe routes and outdoor-unit positioning.

Ask JMG to design your system

Your survey should confirm

  • Required heating output
  • Design flow temperature
  • Radiator or emitter upgrades
  • Hot-water cylinder capacity
  • Outdoor-unit location and acoustics
  • Electrical and pipework requirements

Grant Aerona 290 gallery

Official Grant Aerona 290 information

Review Grant UK’s full technical specifications, downloads and product information for the Aerona 290 range.

View Grant UK product information

Guarantee wording

Grant states that eligible G1 installers who have completed the required Grant heat-pump training may offer a seven-year guarantee, subject to Grant’s terms. JMG will confirm the applicable guarantee in your written quotation.

What your quotation can include

  • Correctly sized heat pump
  • Suitable hot-water cylinder
  • Room-by-room heat-loss calculation
  • System design and controls
  • Outdoor-unit mounting arrangement
  • Required plumbing and electrical work
  • Emitter upgrades where needed
  • Installation and commissioning
  • MCS documentation and grant application
  • Handover, warranty registration and aftercare

Equipment is selected for the property rather than promised as a fixed standard package.

Boiler Upgrade Scheme support

£7,500

Standard heat-pump grant

Eligible homeowners may receive £7,500 towards an eligible air-to-water heat-pump installation.

Up to £9,000

Eligible off-grid oil or LPG homes

A higher grant may be available for qualifying off-gas-grid properties currently heated by oil or LPG.

Eligibility and voucher approval are subject to the current scheme rules. JMG applies for the voucher on the customer’s behalf as the installer.

Check grant information

Compare other heat-pump systems

System Type May suit
Grant Aerona 290 Split air-to-water Homes requiring a modern monobloc heat pump across a broad output range, subject to heat-loss design and R290 installation requirements.
Daikin Altherma 3 small monobloc Compact monobloc Suitable smaller homes where the calculated heat load matches the available low-capacity range.
Daikin Altherma 3 large monobloc Higher-output monobloc Larger or higher-loss properties requiring more output after a full heat-loss calculation.
Vaillant aroTHERM plus Premium monobloc Retrofit and new-build projects needing a premium system with a wide capacity range.
Panasonic Aquarea Model-dependent range A wide variety of new-build, retrofit and colder-climate requirements.
Grant Aerona 290 R290 monobloc Homes requiring a broad output range, high seasonal efficiency and Quiet Mark accredited design

Return to the full heat-pump comparison

From survey to aftercare

1

Survey

Property, heating system, hot water and equipment locations assessed.

2

Design

Heat loss, capacity, cylinder and emitter requirements calculated.

3

Quote and grant

Written specification prepared and eligible grant process supported.

4

Installation

System installed, commissioned, handed over and supported.

Grant Aerona 290 FAQs

What capacity do I need?

The correct capacity must be calculated from a room-by-room heat-loss assessment. Floor area alone is not enough.

What cylinder size will be included?

The cylinder is selected for household hot-water demand, available space and the system design rather than supplied as one fixed size.

Will my radiators need replacing?

Existing emitters are checked against the required system temperatures. Only the upgrades required by the design should be included.

Is the installation free with the grant?

No. The grant contributes towards an eligible installation; the remaining cost depends on the property-specific quotation.

Can JMG service the system?

Yes. View heat-pump servicing and maintenance options.

Request a Grant Aerona 290 survey

Tell us about your property and current heating system. JMG Renewables will contact you to discuss the next step.

What system do you have now?
How many bathrooms do you have?
Name
Address

Stripe and Klarna available at checkout. Where offered, choose Klarna securely through our Stripe payment page. Availability is subject to Klarna’s approval and terms.